Category Archives: Levelers

Levelers – H100- 5/8 x 12″


Posted by Blog Moderator.

At California Caster, we have a wide array of leveling solutions.  The H100-5/8-12″ leveler is made of stainless steel and has extensive longevity.  This ultra-hygienic model has a covered transition between foot plate and thread.  The vulcanized rubber conforms with FDA standard guidelines for rubber products for the food-industry.  With its round and hygienic design, clean-up is a breeze. Levelers - H100

 

Slant Base Stud Leveler


Posted by Blog Moderator.

Here at California Caster we carry a wide array of leveling feet.  Shown here is the slant base stud leveler (IL2-8G-3.325-1/4″ BH).  This leveler is ideal for heavy-duty loads.  The integrated ball and swivel socket provides a low-friction support interface.  This leveler is optimal for cabinets, instruments, machinery, and various other equipment.  It is offered in stainless steel, steel, and Delrin base models.

slant base stud leveler

80/20 Casters and Leveling Feet


Posted by Blog Moderator.

The light weight, easy to assembly T-Slotted aluminum extrusion framing system, often referred to as “Industrial Erector Set” or 80/20 has become very popular. The system can be used to build custom carts, benches, workstations, robotic fixtures, tables, display cases, safety enclosures and entire assembly lines.  Industrial erector set applications are limitless and so are the selection of casters to move around the final design or leveling feet to provide a level, stable base, one that limits tipping, vibration, wear and noise. California Caster offers a vast selection of casters and leveling feet in a wide range of size and weight requirements. CAD drawings and specifications sheets are available on our website.  If you do not see what you are looking for on our website or are uncertain about what you need, please contact our customer service department at 800-950-8750 and they would be happy to help you find the correct caster or leveler for your application. We also specialize in designing custom solutions for application specific requirements.

Industrial Erector Set Casters & Levelers

Mighty Mount Leveling Mounts – Heavy Industrial Equipment – The Untold Story


Posted by Blog Moderator.

Mighty Mount is the ideal solution for mounting heavy industrial equipment.  There are thirteen different sizes available with load capacities ranging up to 12,500 pounds.  The machinery life is extended with the use of a one-inch thick elastomer pad that ultimately provides a high level of shock and vibration isolation.  Mighty Mount is frequently used on sensitive computerized equipment to isolate the equipment from external shock and vibration.

Mighty Mount

 

Mighty Mount is made sturdy, with reliable construction and a powder coated safety yellow finish that will provide years of reliable and economical service to all your heavy industrial equipment.

Most Common Applications:

  • Die casting machines
  • Vibration-sensitive equipment
  • Drill presses
  • CNC machines
  • Punch presses
  • Press brakes
  • Injection molding machines
  • CMM instruments

Specifications:

  • Meets OSHA anchoring standards
  • High strength steel housing with yellow powder coated finish
  • High-density non-skid elastomer base for vibration control
  • Steel zinc plated stud

Thread Sizes –  ¼-28, 3/8-16, 3/8-24, ½-13, 5/8-11, ½-13, ¾-10, and 1-14

Natural Frequenc(Hz) - 8 to 14 Hz

Base Diameter –   2,3, 5, 6, and 9

Thread length - 1-3/4, 3, 5, 6, and 8

Base Height - 1, 1-1/2, 1-5/8, and 2-1/2

Minimum Load (lbs) - 50 up to 4000

Maximum Load (lbs) - 300 up to 12500

 

Snap Lock Levelers / “The Little Known Leveler”

This entry was posted in Levelers and tagged , on by Blog Moderator.

The SnapLock Leveler is the leveler of choice for applications requiring a non -skid pad. Using a snap ring design around the perimeter of the base, the cap clamps into the outside diameter of the base, locking it securely into place.  Compared to the traditional rubber pads attached with adhesive or caps that just slip over the bottom of the base, SnapLock ensures a much more stable, reliable anti-skid function, allowing the pad to stay in place under the most demanding conditions. This feature is especially important for applications where equipment is moved frequently since the pad will not peel off if the leveler is dragged across a floor.

SnapLock-Leveling-Mounts

These are available in all the standard, metal base Level-It styles from 1″through 3″ base diameters and on all standard finish styles in gold chromate, clear zinc, black oxide, and nickel as well as stainless steel.

Liz Whitney